If the battery of a Samsung device is damaged, then it must be replaced. Replacing the battery is important because it helps keep information that’s saved on the device safe, as well as helping prevent damage to the device’s circuitry from occurring when the battery’s voltage falls below acceptable levels. The good news is that removing a Samsung tablet battery is usually straightforward, and it can usually be done few minutes.
So, if you want to know how to replace a faulty battery of your Samsung Galaxy Tab then read out this guide carefully.
The back of your tablet is held in place by strong adhesive, and in the middle of the back are two plastic latches. If you pull gently on the corners of the tablet, you should be able to remove the rear cover.
Notice: If your battery is swollen, do not proceed with the disassembly. Leave the battery for a professional to handle.
You may have open the transparent plastic cover over your Samsung Galaxy Tab battery. You may have noticed a small piece of folded paper underneath the cover. This is a handy piece of information about your battery, which you should probably save in case you need to replace the battery in the future.
How to Replace the Battery in a Samsung tablet
Here are few simple steps to follow to replace the battery of Samsung Galaxy tablet:
First of you need to remove the back cover of your Samsung tablet. The back cover of your tablet is held on by strong adhesive, and in the middle of the back are two plastic latches holding it in place. If you pull gently on the corners of your Samsung Galaxy tablet you should be able to remove the rear cover and see your battery.
1.Turn off your Samsung Galaxy Tab and take the back cover off.
2.Remove the screws on the battery compartment and disconnect any connection to your tablet.
3. You will now be able to remove the old battery from your Samsung Galaxy Tab. Some of you may notice that there is a small piece of folded paper underneath the transparent plastic that covers your Samsung galaxy tab battery. This is a handy piece of information about your battery, which you should probably save for the future.
4. Put your new Samsung Galaxy Tab battery in and replace any screws that were holding the old one in place. Now make sure to reconnect all connections and turn on your Samsung galaxy tab.
5. Your Samsung galaxy tab will now boot. Please note, do not return your tablet to the device if it is powered on because this may cause permanent damage to your battery and prevent it from charging in the future.
That’s all you need to know about How to replace a Samsung Galaxy Tab battery
Watch the video to have more ideas about replacing the battery of Samsung galaxy tablet.
How to Maintain the Battery of Samsung Galaxy Tablet?
The best way to maintain the battery of your Samsung Galaxy Tab is to keep it charged when not in use. For proper maintenance, every time you unplug the charger from the wall outlet or USB port on your computer, you should fully discharge and then fully recharge your tablet’s battery. This conditioning will help prolong your battery’s life
If you own a Samsung Galaxy Tab then it is likely that you will need to replace the battery at some point. However, replacing a battery on a Samsung tablet isn’t tricky. Not every battery in a Samsung tablet will eventually stop working. Sometimes, it will just be stuck in place. The above guide is all about to help you how to replace the battery of a Samsung tablet in just a few simple steps. You can follow the above method to make your problem resolved.